How and where to sew your nametape on your FTU shirt

patricklessard9
May 9
2 min read

Hello Junior Wildcats, we have begun distributing nametapes.

Below you will find how and where to sew the soft part of the velcro that came with your nametape according to the width of your FTU shirt.

DO NOT GLUE THE SOFT VELCRO TO THE FTU SHIRT

Please read carefully and if you have ANY questions BEFORE proceding, don't be shy to ask FIRST.

You have two methods of sewing your soft Velcro. Please try both methods first and if your soft velcro is centered using method 1 than use this method. If not, please use method 2.

1-You have a bigger FTU shirt size:

Button your FTU shirt and lay it flat on a table
Find the center of the right side pocket
Find the center of the soft Velcro band.
Align the center of the velcro band with a vertical line starting from the center of the pocket. See image below for visual references.
If your FTU shirt is to small, the soft Velcro band won't be centered and will overlap the button "line". If that's the case, please use the smaller size instructions See 2ND image of what not to do!
Sew by hand or with a sewing machine with olive or white thread 5mm above the left corner of the pocket.
Stick your nametape on the Velcro and wear it with pride!

Method 1 for a larger FTU shirt size

What not to do in one image!

2-You have a smaller FTU shirt size:

Button your FTU shirt and lay it flat on a table
Measure the bottom of the soft Velcro 5mm above the left corner of the right side pocket
Center the TOP of the soft Velcro band between the First sew line of the sewing line from the sleeve AND the side of the button "line" See picture below for visual references
Sew by hand or with a sewing machine with olive or white thread.
Stick your nametape on the Velcro and wear it with pride!